FEC Onlineservices
 
IPSec connection with an IPSecuritas Client from an Apple MAC to the bintec IPSec test gateway
This FAQ describes the configuration of an IPSec connection with the IPSecuritas Client from an Apple MAC to the bintec IPSec test gateway.

1. Scenario


2. Requirements
  • In this example, the Apple MAC provides the software “IPSecuritas” Version 3.4 which can be downloaded at 'www.lobotomo.com'
  • The bintec test gateway was used as the remote station.

3. Configuration IPSecuritas
Please see the screenshots below for the IPSecuritas configuration...






In this example, the Preshared Key is "supersecretgeheimkey".


4. Connection establishment


By clicking the “start” button, the IPSec tunnel will be established. The green status light shows the successful establishment.

5. Test


The test gateway's LAN IP-address is reachable by ping on 192.168.100.1


The Funkwerk test server can be accessed in the browser on 192.168.100.2.

lm

© 2013 bintec elmeg GmbH